Excellence and quality in the production of valves

Certifications

The excellence of the quality is the main characteristic of GEMELS products and this is possible due to the accurate selection of raw materials, staff and partners carried out by the management. 

ISO 9001

ISO 9001

ISO 14001

ISO 14001

ISO 45001

ISO 45001

Product certifications

DNV
The DNV certificate (Det Norske Veritas body) regulates products and equipment conformity to the maritime regulations and requirements.
UKCA
The UKCA Ex certification (UK Conformity Assessed EXplosive atmosphere) regulates equipment used in areas with an explosive atmosphere in the United Kingdom. The UKCA PER certification (UK Conformity Assessed Pressure Equipment Regulation) regulates the design, manufacture, equipment and conformity assessment of pressure equipment ensuring a high level of safety in the United Kingdom.
ATEX
CE ATEX
The CE certification ATEX (ATmosphere EXplosive) regulates equipment used in areas with an explosive atmosphere in the EU.
CE
CE PED
The CE PED certification (Pressure Equipment Directive) regulates the design, manufacture, equipment and conformity assessment of pressure equipment ensuring a high level of safety in the EU.
FIRE SAFE
The FIRE SAFE certificate regulates conformity of the production to the fire safety requirements.
EAC
EAC
The EAC certificates and declarations (EurAsian Conformity) demonstrates that products conform to all technical regulations of the Eurasian Customs Union, particularly referring to pressure equipment, those used in areas with an explosive atmosphere and machines.
CRN
The CRN certificate (Canadian registration number) regulates the pressure safety design accepted and registered for use in Canada.
FUGITIVE EMISSION
The FUGITIVE EMISSION certificate regulates and controls the air pollution.
TA LUFT
The TA LUFT certification (Technische Anleitung zur Reinhaltung der Luft) is a German air pollution control regulation.
SIL 3
The SIL 3 certification (Safety integrity level) regulates the level of risk-reduction provided by a safety function of a system of equipment.

Product certifications

In the Internal Laboratory, GEMELS S.p.A. qualified personnel tests the valves’ life cycle, simulating critical applications and conditions with special machineries (burst test, impulse test, salt spray test, climatic room, Tridimentional check, microscope, hardness gauge, bidimensional gauge) to constantly ensure the highest quality. Products are tested 100%.